• Secure Payment Methods

    UNIVERSAL WAX for FAP additive/wet (1 L/ 3 L) | Diag-auto.com
    • UNIVERSAL WAX for FAP additive/wet (1 L/ 3 L) | Diag-auto.com
    • UNIVERSAL WAX for FAP additive/wet (1 L/ 3 L) | Diag-auto.com
    • UNIVERSAL WAX for FAP additive/wet (1 L/ 3 L) | Diag-auto.com
    • UNIVERSAL WAX for FAP additive/wet (1 L/ 3 L) | Diag-auto.com
    • UNIVERSAL WAX for FAP additive/wet (1 L/ 3 L) | Diag-auto.com

    UNIVERSAL WAX for FAP additive/wet (1 L/ 3 L)

    FTFAP46288A

    UNIVERSAL Cerine to fill the additive tank on vehicles equipped with a wet particulate filter.

    It is compatible with the EOLYS DPX42, EOLYS 176, the infineum F7995 and the EOLYS PowerFlex. This product is an ideal solution for professionals and allows to have only one reference to store. 

    For more details, see the description. 

    Caution : this product can only be used for rigid tanks.

    Volume souhaité
    €26.95
    Tax excluded
    Quantity

     

    Secure payment - Information protected

     

    Fast delivery - 90% within 2 to 3 days

     

    Returns within 14 days

    Description

    UNIVERSAL Cerine with filling kit for additive/wet FAP (1 L / 3 L)

    What is cerine ?

    Cerine is the addictive acid directly integrated into the additive particle filters. It is designed to improve the regeneration quality of this FAP. Otherwise known as EOLYS, this mixture of cerium dioxide, ferrocene (iron oxide) and solvents is a French invention used mainly by the PSA/Stellantis group (Peugeot, Citroen, DS, Mini with PSA engine, Ford/PSA engine, ...).

    This additive will create a catalytic effect by lowering the burning temperature of the particles. Thus, thanks to cerine, you do not need to make long journeys in order for the regeneration of the particle filter to be done correctly. Soot will burn at a lower temperature and thus more quickly on journeys in agglomeration for example.

    Its composition has greatly evolved over time with the complexity of the engines, and the hardening of European standards. Each additive generation is therefore specific to a powertrain.

    Product available in 1 L or 3 L

    FAP dry or additive?

    For information, a vehicle equipped with a "SEC particulate filter" does not have an additive pocket or tank. A "ADDITIVE or WET particulate filter" has an additive tank. This technology is used on vehicles with engines designed by PSA/ Stellantis (range Peugeot, Citroen, DS, some Mini, some Ford,...).

    What cerine should I use for my vehicle ?

    Not sure which cerine to choose? Do you want to save time and energy? Universal cerine the ideal solution for you!  This applies to all vehicles equipped with a so-called wet particulate filter and allows easy and fast use.

    The table below allows you to easily and quickly identify which cerine to use : 

    DENOMINATIONMANUFACTURING DATEOPR NUMBERCOLOR ON THE CONNECTORREFERENCE

    Cerine 1

    (EOLYS DPX 42)

    Before 11/2002… > 9492    Grey    

    FTFAP64288A

    ou

    FTFAP16288A

    Cerine 2

    (EOLYS 176)

    Between 11/2002 and 02/20109493 > …     Green    

    FTFAP74288A

    ou

    FTFAP16288A

    Cerine 3

    (infineum F7995)

    After 02/201012166 > …     Blue    

    FTFAP84288A

    ou

    FTFAP16288A

    Cerine 4

    (Eolys Powerflex)

    After 03/201012166CB > …    Black    

    FTFAP16288A

    ou

    FTFAP16288A

    Universal cerine

    (1, 2, 3 et 4)

    Universal (before11/2002- after 03/2010UniversalUniversal

    FTFAP16288A

    To facilitate your searches, we have set up a table to select the FAP additive of your choice, without any risk of error.

    As you will have understood, several indicators allow you to choose the right cerine :

    1. The date of manufacture of the vehicle. Example: If your vehicle is pre-2002, you know that FTFAP64288 (cerin 1) is the one that corresponds to your PFF.

    2. OPR number: the OPR number is used as a reference for Peugeot & Citroën vehicles. It indicates the date of production of the automobile. This number is usually at the left front door.

    3. Finally, the color of the connector on the additive tank can also point you. Indeed, when disassembling the additive tank, you will find a color on the connector. This color corresponds, in most cases, to the cerine you need. Be careful, in some countries, the colors are different. In this case, prefer the two previous methods.

    Operating procedure:

    After following these instructions, follow these steps to ensure optimal results:

    1. Connect the filler kit to the additive tank.
    2. Connect the kit recovery tube to the overflowing access of the additive tank and place an empty container under the hose to recover the excess additive.
    3. Place the additive bottle above the tank level to perform gravity filling (make an air inlet in the bottle to optimize filling)
    4. After filling, reconnect the connectors.
    5. With the aid of a diagnostic device, it is usually necessary to inform the engine management computer (engine ECU) that the additive tank has been refilled. 

     Note : Eolys/ Cérine is an aggressive product. It is therefore not recommended that individuals fill the FAP additive tank themselves. In addition, it may be necessary to use a diagnostic device to remove the DTC fault code(s) and reset/reset the additive ECU or engine management ECU.

    Product Details
    FTFAP46288A
    120 Items
    8 other products in the same category:
    Nettoyant FAP diesel - 375ml Quick view

    Reference: JLMJ02210

    Brand: JLM Lubricant

    Diesel Particulate Filter Cleaner - 375ml

    One of the best diesel particulate filter cleaners on the market. JLM DPF Cleaner contains a high concentration of the active additive. Many cars only make short trips, so the engine is almost unloaded. As a result, there is no regeneration of the particulate filter and soot accumulates in the particulate filter, which eventually clogs up. Then the orange...

    Price €26.00
    Tax excluded
    More
    In stock
    Pump for Citroën cerine tank (FAP) (Model 1)| Diag-auto.com Quick view

    Reference: FTFAPPCM01A

    Pump for Citroën cerine tank (FAP) (Model 1)

    Pump for Citroën cerine tank (FAP). This pump is essential for tank replacement or repair, ensures optimal start up of the additive liquid and helps to maintain the performance of the particulate filter.

    Price €64.90
    Tax excluded
    More
    In stock
    Wax bag / FAP additive for PSA - 2.40 litres | Diag-auto.com Quick view

    Reference: FTFAP27288A

    Cerine bag/ FAP additive for PSA Peugeot Citroën - 2.40 litres

    2.40 litres cerine bag (FAP additive) for PSA Peugeot Citroën vehicles, containing an additive to facilitate the regeneration of the particulate filter by reducing the combustion temperature of the soot, in order to reduce the polluting emissions from diesel engines.

    Price €67.42
    Tax excluded
    More
    Last items in stock
    -10% Out-of-Stock -10% DPF cleaning product for Diesel motors Quick view
    Price €44.99 Regular price €49.99
    Tax excluded
    More
    Out-of-Stock
    FAP Tank Pump (Model 5)| Diag-auto.com Quick view

    Reference: FTFAPPCM05A

    Cerine tank pump (FAP) (Model 5)

    Pump for cerine tank (FAP): Ford, Mazda et Volvo. This pump is essential for tank replacement or repair, ensures optimal start up of the additive liquid and helps to maintain the performance of the particulate filter.

    Price €64.90
    Tax excluded
    More
    Last items in stock
    DPF cleaner - cleaning product 5L Quick view

    Reference: FTCS77003A

    Brand: Air Conditioning Solution

    DPF cleaner - cleaning product 5L

    DPF cleaner - cleaning product 5L Product to clean the particulate filter (DPF). This liquid must be used with a DPF cleaner dispenser  Quantity: 5 LitersNumber of possible uses: 6 uses

    Price €49.95
    Tax excluded
    More
    In stock
    Wax bag / FAP additive for PSA - 1.75 litre | Diag-auto.com Quick view

    Reference: FTFAP35288A

    Cerine bag/ FAP additive for PSA Peugeot Citroën - 1.75 litre

    1.75 litre cerine bag (FAP additive) for PSA Peugeot Citroën vehicles, containing an additive to facilitate the regeneration of the particulate filter by reducing the combustion temperature of the soot, in order to reduce the polluting emissions from diesel engines.

    Price €59.17
    Tax excluded
    More
    In stock
    DPF Flush Gun |DIAG-AUTO.COM Quick view

    Reference: FTCS77007C

    DPF Flush Gun

    DPF FLUSH Gun DPF FLUSH GUN is a specific compressed air equipment designed for cleaning diesel particulate filters. Equipped with simple and easy interchangeable probes, the DPF FLUSH Gun is used on all types and models of particle filters.

    Price €99.00
    Tax excluded
    More
    Last items in stock

    Follow us on Facebook