
Reference: FTFAP81298A
Carter additive/cerine pouch for Peugeot/ Citroen (Model 3)
Additive/cerine tank housing suitable for cars with an additive FAP. Compatible for Peugeot/ Citroen brands.





Pump for cerine tank (FAP): Ford, Mazda et Volvo. This pump is essential for tank replacement or repair, ensures optimal start up of the additive liquid and helps to maintain the performance of the particulate filter.
Secure payment - Information protected
Fast delivery - 90% within 2 to 3 days
Returns within 14 days
Complete repair kit for FAP tank: Ford, Mazda et Volvo:
|
MAZDA | 3 (BK) | 1.6 DI Turbo | 109 CV | 2004-2009 |
| 1.6 MZ-CD | 90 CV | 2006-2009 | ||
| 2.0 MZR-CD (BK14) | 143 CV | 2006-2009 | ||
3 Sedán (BK) | 1.6 DI Turbo (BK12Y) | 109 CV | 2004-2009 | |
| 2.0 MZR-CD (BK12) | 143 CV | 2006-2009 |
VOLVO | S40 II (544) | 1.6 D | 110 CV | 2005-2012 |
| 2.0 CDI | 133 CV | 2005-2006 | ||
| 2.0 D | 136 CV | 2004-2010 | ||
| 2.4 CDI | 163 CV | 2007-2010 | ||
| D2 | 115 CV | 2010-2012 | ||
| D3 | 150 CV | 2010-2012 | ||
| D4 | 131 CV | 2005-2006 | ||
| D4 | 177 CV | 2010-2012 | ||
| D5 | 179 CV | 2006-2010 | ||
S80 I (184) | 2.4 D | 131 CV | 2001-2006 | |
| 2.5 TDI | 140 CV | 1999-2006 | ||
| D5 | 163 CV | 2001-2006 | ||
V50 (545) | 1.6 D | 109 CV | 2005-2012 | |
| 1.6 D | 110 CV | 2005-2011 | ||
| 2.0 CDI | 133 CV | 2003-2006 | ||
| 2.0 D4 | 131 CV | 2005-2006 | ||
| 2.0 D | 136 CV | 2004-2010 | ||
| 2.4 Tdi | 163 CV | 2007-2010 | ||
| D2 | 114 CV | 2010-2012 | ||
| D3 | 150 CV | 2010-2012 | ||
| D4 | 177 CV | 2010-2012 | ||
| D5 | 179 CV | 2006-2010 |
1. DISMANTLING THE PUMP:
Remove the tank. Using a utility knife or another cutting tool, carefully separate the white support from the tank without cutting too deeply. Once removed, disconnect the pump and gently pull it out to separate it from the white support.
2. INSTALLING THE PUMP:
Attach the pump to the white support and reseal it to the tank using the special epoxy putty included in the kit (3RG REF.: 88230). Allow it to dry for 12 hours before refilling the tank.
3. APPLYING THE 4-IN-1 REGENERATOR:
Refill the tank with the 4-in-1 regenerating liquid (3RG REF.: 88265) using the included filling kit.
4. CONNECTING THE DIAGNOSTIC DEVICE:
Finally, activate the "tank replacement" process to correctly prime the pump. At a certain point, the computer will prompt you to wait approximately 15 minutes, which is the time needed for intermittent priming of the pump. Once complete, the system will indicate the process is finished.
Safety Data Sheet available upon request.
Reference: FTFAP81298A
Additive/cerine tank housing suitable for cars with an additive FAP. Compatible for Peugeot/ Citroen brands.
Reference: ERC1772F1
Brand: ERC
This product is a concentrated rinsing liquid to remove all residues and corrosive agents without disassembly. This liquid is used after using FAP Cleaner n°1.
Reference: ERC1753F025
Brand: ERC
Extend the life of your particulate filter! The Top Pro Protech FAP allows the complete combustion of the soot present on the particle filters. This product will also allow you to reduce maintenance costs by avoiding premature clogging of the particulate filters.
Reference: FTFAP76288A
Two litre cerine bag (FAP additive) for PSA Peugeot vehicles, containing an additive to facilitate the regeneration of the particulate filter by reducing the combustion temperature of the soot, in order to reduce the polluting emissions from diesel engines.
Reference: FTFAPPCM12A
Pump for cerine (DPF) tank – PSA Compatible brands: Citroën, Peugeot, Mitsubishi
Reference: FTFAP35288A
1.75 litre cerine bag (FAP additive) for PSA Peugeot Citroën vehicles, containing an additive to facilitate the regeneration of the particulate filter by reducing the combustion temperature of the soot, in order to reduce the polluting emissions from diesel engines.
Reference: JLMJ02230
Brand: JLM Lubricant
The JLM Diesel DPF Cleaning Kit has been developed for cleaning clogged diesel particulate filters and to prevent future repeated build-up of soot in the particulate filter.