




Note: the power cable to power up the diagnostic device and / or the interface is supplied (via the 2 alligator clips).
Secure payment - Information protected
Fast delivery - 90% within 2 to 3 days
Returns within 14 days
The cable is composed by a female OBD adapter on one side.
Citroën: AX (1991 and following), BX (1990 ...), XM (1989 ...), Xantia (1993 ...), ZX (1991 ...). Peugeot: 106 1991>, 205 1988>, 306 1993>, 309 1988>, 405 1987>, 605 1990>
Engine management Magneti Marelli G5 single & multipoint, G6.11, 8P & AP, Fenix 1B, 3B & 4, Mono-Jetronic, Mono-Motronic MA3.0, Motronic M1.3, MP3.1, MP3.2, ML4. 1, MP5.1, 5.1.1 -
You can find below a photo of the diagnostic plug for a Peugeot 405 :

- We do not have any specific information on this. The socket may be located under the bonnet. Thank you for kindly send us a photo, documentation, ... By email to [email protected]
Reference: FTCAFIA03W
Adapter cable for old Fiat vehicles. Caution: This cable is supplied without the power supply required to operate it. You can find it at this reference: FTCAGENALIM
Reference: FTCAGENALIM
Generic power cable This cable is used to power the adapter cables for old Fiat, PSA (Peugeot Citroën) and Hyundai vehicles. It complements the following cables: - FTCASF190 - FTCAFIA3W - FTCAHYU12W.
Reference: FTCAPOR19W
19-pin Porsche adapter for OBD/OBD2 16-pin female. Connect your OBD2 diagnostic device to your Porsche vehicle equipped with the first generation OBD plug with this 19-pin adapter cable.
Reference: FTCABMWRJ45W
Diagnostic Scanner Adapter Cable for Autel MS908 Pro, MS908S Pro and MaxiSys Elite IM608 for BMW F Series chassis models.
Reference: FTCAMER38W
Adapter cable for old vehicles (before the 2000s) from Mercedes. The cable consists of a 38-pin connector on one side and an OBD / OBD2 female adapter on the other
Reference: FTCAHYU12W-2
This cable is compatible with older models of Hyundai, Mitsubishi or Dodge allows you to connect to your vehicle with a diagnostic device equipped with an OBD EOBD socket.