





To check the quality of brake fluid
3 LEDs to indicate percentage of water in the brake fluid
Automatically power off
Opetated by a LR03 AAA 1.5V battery
Secure payment - Information protected
Fast delivery - 90% within 2 to 3 days
Returns within 14 days
Press switch to turn on green - LED illuminates to indicate battery OK, press switch again to turn off ( red LED - replace battery without testing)
Tester has auto-off function at about 15 seconds after turn-on.
When tester indicates yellow or red LED after testinf, press switch within 10 seconds, you can move on the next test.
Immerse probe of the tester into brake fluid (probe tip must be at least 10mm above bottom of fluid reservoir)
Green LED= Brake Fluid H²O < 1.5% (Brake Fluid OK)
Yellow LED= Brake Fluid H²O = [1.5% - 3%] (low percentage of water)
Red LED= Brake Fluid H²O > 3% (Change Brake Fluid)
To confirm correct operation, immerse probe in plain water, red LED will illuminate if tester is operating correctly
Discalimer Cause
Important: No liability is accepted for incorrect use of this product
Warranty: Guarantee is 12 months from purchase date, proof which will be reclaimed for any claim
Reference: GUN77039
Terminal test set designed to fit on standard 4mm Banana plugs as used on multimeter and other testing equipment. Complete with aluminium storage case. Terminal test set Designed to fit on standard 4mm Banana plugs as used on multimeter and other testing equipment Also suitable for other test equipment Great time saver Complete with Aluminium storage case