Cerine tank repair pump (FAP) - PSA (Model 8)
Cerine tank pump (FAP) PSA: Citroën and Peugeot
Models concerned:
| Marque | Modèle | Motorisation | Puissance | Année modèle |
CITROËN | C4 AIRCROSS | 1.6 HDi 115 | 114 CV | 2012-... |
| 1.6 HDi 115 AWC | 114 CV | 2012-... |
C4 II (NC_) | 1.6 BlueHDi 100 | 99 CV | 2014-... |
| 1.6 BlueHDi 115 | 115 CV | 2014-... |
| 1.6 BlueHDi 120 | 120 CV | 2015-... |
| 1.6 HDi 90 | 92 CV | 2009-... |
| 1.6 HDi 110 | 112 CV | 2009-... |
| 1.6 HDi 115 | 114 CV | 2012-... |
| 2.0 HDi / BlueHDi 150 | 150 CV | 2009-... |
| 2.0 HDi / BlueHDi 160 | 163 CV | 2010-... |
C4 II Furgoneta/hatchback (NC_) | 1.6 HDi | 92 CV | 2010-... |
| 1.6 HDi | 111 CV | 2009-... |
| C4 II Sedán (NC_) | 1.6 HDi | 115 CV | 2013-... |
DS4 (NX_) | 1.6 BlueHDi 115 | 115 CV | 2014-2015 |
| 1.6 BlueHDi 120 | 120 CV | 2014-2015 |
| 1.6 HDi 90 | 92 CV | 2011-2015 |
| 1.6 HDi 110 | 112 CV | 2011-2015 |
| 1.6 HDi 115 | 114 CV | 2012-2015 |
| 2.0 BlueHDi 150 | 150 CV | 2014-2015 |
| 2.0 BlueHDi 180 | 180 CV | 2014-2015 |
| 2.0 HDi / BlueHDi 135 | 136 CV | 2011-2015 |
| 2.0 HDi 165 | 163 CV | 2011-2015 |
PEUGEOT | 308 I (4A_, 4C_) | 1.6 HDi | 90 CV | 2007-2014 |
| 1.6 HDi | 92 CV | 2009-2014 |
| 1.6 HDi | 109 CV | 2007-2014 |
| 1.6 HDi | 112 CV | 2009-2014 |
| 1.6 HDi | 114 CV | 2013-2014 |
| 2.0 HDi | 136 CV | 2007-2014 |
| 2.0 HDi | 140 CV | 2010-2012 |
| 2.0 HDi | 150 CV | 2011-2014 |
| 2.0 HDi | 163 CV | 2012-2014 |
308 SW I (4E_, 4H_) | 1.6 HDi | 90 CV | 2007-2014 |
| 1.6 HDi | 92 CV | 2009-2014 |
| 1.6 HDi | 109 CV | 2007-2014 |
| 1.6 HDi | 112 CV | 2009-2014 |
| 1.6 HDi | 114 CV | 2013-2014 |
| 2.0 HDi | 136 CV | 2007-2012 |
| 2.0 HDi | 140 CV | 2007-2014 |
| 2.0 HDi | 150 CV | 2011-2014 |
| 2.0 HDi | 163 CV | 2009-2014 |
508 I (8D_) | 2.0 HDi | 136 CV | 2010-2018 |
| 2.0 HDi | 140 CV | 2010-2018 |
| 2.0 HDi | 163 CV | 2010-2018 |
508 SW I (8E_) | 2.0 HDi | 136 CV | 2010-2018 |
| 2.0 HDi | 140 CV | 2010-2018 |
| 2.0 HDi | 163 CV | 2010-2018 |
3008 Monospace (0U_) | 2.0 HDi | 136 CV | 2011-2016 |
| 2.0 HDi 150 / BlueHDi 150 | 150 CV | 2009-2016 |
| 2.0 HDi | 163 CV | 2009-2016 |
| 2.0 HDi Hybrid4 (0URHCA) | 200 CV | 2011-2016 |
| RCZ | 2.0 HDi | 163 CV | 2010-2015 |
Instructions for Use:
1. DISMANTLING THE PUMP:
Remove the tank. Using a utility knife or another cutting tool, carefully separate the white support from the tank without cutting too deeply. Once removed, disconnect the pump and gently pull it out to separate it from the white support.
2. INSTALLING THE PUMP:
Attach the pump to the white support and reseal it to the tank using the special epoxy putty included in the kit (3RG REF.: 88230). Allow it to dry for 12 hours before refilling the tank.
3. APPLYING THE 4-IN-1 REGENERATOR:
Refill the tank with the 4-in-1 regenerating liquid (3RG REF.: 88265) using the included filling kit.
4. CONNECTING THE DIAGNOSTIC DEVICE:
Finally, activate the "tank replacement" process to correctly prime the pump. At a certain point, the computer will prompt you to wait approximately 15 minutes, which is the time needed for intermittent priming of the pump. Once complete, the system will indicate the process is finished.
Safety Data Sheet available upon request.