FAP Cleaner Without Disassembly 400 ml (Aerosol) - ERC
The 400 ml FAP cleaner without disassembly by ERC effectively resolves issues caused by a DPF clogged with soot, ash, and carbon without the need for removal. It significantly reduces maintenance costs and can help avoid DPF replacement as well as a follow-up inspection at the technical control.
Kit Contents:
- 1 x 400 ml FAP cleaner without disassembly
- 1 x extension tube (with star-shaped nozzle)
Key Benefits of This FAP Cleaner:
- Suitable for all DPFs
- Fast-acting and solvent-free
- Dissolves soot, ash, and carbon deposits
- Helps restore engine performance or resolve issues related to DPF clogging (engine warning light)
How to Use This Product Effectively:
As a guide, in some cases with severe clogging (70% or more blockage), you may need to repeat the process twice.
For diesel engines with a displacement of:
- 1400cm³ to 2000cm³ (1 aerosol)
- 2000cm³ to 3000cm³ (1 to 2 aerosols)
- 3000cm³ to 4000cm³ (2 aerosols)
- Tractor/Heavy vehicle diesel engines (3 aerosols)
Instructions:
- Turn off the engine and ensure it is cold. Remove the temperature sensor from the DPF or the differential pressure sensor hose.
- Insert the aerosol's extension tube.
- Spray 3 to 5 times, allowing a 5-minute pause between each spray, and repeat until the aerosol is empty.
- Start the engine and let it idle until you see the product draining from the exhaust.
- Reinstall the sensor and drive at 3000 rpm for 30 minutes or 30 km.
- If a warning light remains on, force the DPF regeneration with a diagnostic tool, then check the values.
- If necessary, clear the engine fault code.
Note: Wearing protective gloves and safety goggles is highly recommended.