



Bardahl / Pass'contrôle technique antipollution - PETROL (New)
Bardahl Gasoline Technical Control Pass stops the fumes, cleans the supply circuit and restores the compressions. Thanks to him, put all the chances on your side to pass the antipollution tests of the technical control!
Secure payment - Information protected
Fast delivery - 90% within 2 to 3 days
Returns within 14 days
Using the Antipollution - Gasoline Technical Control Pass allows you to clean your engine by precisely targeting the components most sensitive to engine fouling. The formula used is a complex of multifunctional additives. The high concentration of cleaning substances uses your diesel fuel as a carrier in order to better clean your engine. Your additive fuel becomes the curative solution to clean your engine.
This pack contains a "Stop smoke" bottle and a "Injector cleaner" bottle. Their cumulative action cleans the fuel system, restores compressions, stops fumes, reduces consumption and restores the performance of your vehicle, thus maximizing your chances of success in technical control antipollution tests.
Avoids overconsumption of oil and fuel.
Reduces engine noise and wear.
Stops oil leaks.
Reduces exhaust fumes.
Cleans and protects the entire injection system.
Restores the flow rate of the injectors.
Removes acceleration holes and deceleration instability.
Limits CO2 emissions and makes it easier to pass technical control antipollution tests.
As soon as your vehicle is 4 years old, use the Technical Inspection Pass every two years. For maximum efficiency, use it about 400 km before going through technical control or visiting your approved center.
For the "Smoke stop": pour the bottle into the oil sump when the engine is hot and stopped.
For "Injector cleaner": pour the bottle into 20 liters of fuel. Drive 25 minutes at 2,500 to 3,500 rpm, then drive normally until fuel is exhausted and refuel.
Reference: JLMJ0040PR
Brand: JLM Lubricant
Protective gloves for the use of harmful products Size XL
Reference: WL10511
Brand: Wynn's
The MultiSERVE Particulate Filter Cleaning Kit allows professional cleaning of particulate filters through the application of the kit products with the Wynn's MultiSERVE machine. The kit removes solid deposits from clogged particulate filters, reduces exhaust pressure and improves engine performance. The kit contains: One cleaning product / 1 litre...
Reference: ERC1603F0220FR
Brand: ERC
Optima Diesel ECR / 200mlOptimize your performance and your consumption! Cleans the injectors and relieves the Particulate Filter Reduces pollutants in the exhaust gases Reduces fuel consumption and facilitates cold starting Maintains engine power and restores original performance. Treatment : PreventiveDosage: One dose (200ml) is suitable for 40-60...
Reference: BAR4455x1
Brand: Bardahl
Bardahl brake cleaner Bardahl brake cleaner is an ultra powerful degreaser that cleans and eliminates all oil, grease and tar residues.
Reference: ERC2153F02
Brand: ERC
ERC Nano 10-9 Racing Oil Additive / Petrol & DieselOptimize engine performance with NANOTECHNOLOGY! Hardens and smoothes liners and pistons by forming chemically active nalostructures. Cleans the engine and oil lines Allows the engine to develop its full power Increases oil viscosity, stabilizes pressure, and decreases agingPreventive treatment...
Reference: IT290
Brand: Irontek
Eco-cleaning is the economical solution to engine fouling problems. The use of this cleaner avoids the change of injectors and limits polluting emissions, we recommend this product to avoid the counter-visit when passing the technical inspection. In addition, this concentrated formula ensures unmatched performance. Also available for petrol engines:...