





This USB cable is used for connecting the Pass-Thru Tool to a PC.
The connector shell (shown on the picture) is NO LONGER supplied.
note: Bentley scantool user manual (ref. WT03001 issue 9) available on demand in English or French.
Secure payment - Information protected
Fast delivery - 90% within 2 to 3 days
Returns within 14 days
This USB cable is used for connecting the Pass-Thru Tool to a PC.
The original cable used to have an empty serial connector shell attached to the cable. This shell can be secured in a spare serial port in the PC to take strain from the USB connection.
The connector shell (shown on the picture) is NO LONGER supplied.
Length: 1 m.
Manufacturer: Omitec
Note: this cable does not connect to the scantool / HHT / Hand Held tester. the cable which enables to connect the Scantool to the PC (ou VAS 5052) has reference OM100/12.
Reference: WT10034
Brand: Omitec
Bentley / Rolls-Royce hand held diagnostic tool (software version 8.0.0000) Note: no cable supplied by default as 2 different cables exists.
Reference: OM170/6
Bentley - ARC programming adapter - OM170/6 Also available as Bentley WT10118.
Reference: OM100/12
Câble aux multiples fonctions pour appareil de diagnostic Bentley:câble de mise à jour du logiciel interne du testeur à main (HHT), câble pour transférer les codes de panne (DTC) vers le PC (VAS 5052) câble pour travailler depuis le PC (VAS 5052).
Reference: OM170/3 (WT10245P)
EOBD cable for Bentley diagnostic tool unit (HHT - Hand held Tester). EOBD cable used to connect Bentley diagnostic devices "Bentley Hand Tester" and "Bentley Pass-Thru Interface" on the vehicle’s OBD2 sockets.